/ Products / CISCO / 4GE-SFP-LC
4GE-SFP-LC

4GE-SFP-LC

CISCO Refurbished

Manufacturer
CISCO
Condition
Refurbished
Availability
In Stock
List Price/RRP
US$75,000.00
Price
US$49.00 Enquire

Description

The Cisco 4GE-SFP-LC is a network interface module that adds high-speed connectivity to Cisco routers and switches. It features four small form-factor pluggable (SFP) slots, each supporting Gigabit Ethernet speeds. SFPs are hot-swappable, allowing for easy customization of network connections. The module is designed for use in enterprise and service provider networks, providing high-performance connectivity for a variety of applications, including voice, video, and data transfer. It supports a range of Cisco IOS software features, including quality of service (QoS), VLAN tagging, and link aggregation. The 4GE-SFP-LC module is easy to install and configure, and supports a reliable, secure network infrastructure. Its compact design makes it ideal for use in small and medium-sized businesses, as well as larger data centers and carrier networks. The Cisco 4GE-SFP-LC module is a reliable, high-performance solution for expanding network connectivity and enhancing overall network performance.

Make an enquiry

about 4GE-SFP-LC

We are Refurbished Network Equipment specialists and we may have 4GE-SFP-LC available to us if it’s not in stock. Please complete the form and we'll get back to you as soon as we can. We have a vast amount of experience and knowledge with all legacy CISCO components and will be happy to provide you with expert after-sales advice, should you need it.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Part Code
4GE-SFP-LC
Description
4 port-GE line card for Cisco 12000
Weight
3kg
Manufacturer
CISCO
End of Hardware Support
Yes (31 August 2017)
End of Sale
Yes (30 August 2012)
End of Life
Yes (31 August 2011)
Warranty
2 year warranty icon

Product Features

Expand

Product Features

Performance
Line-rate throughput for IP forwarding and MPLS switching
Dedicated Layer 3 forwarding engine that provides line-rate throughput for all Ethernet frame sizes
Sustained performance in fully loaded system
Sustained performance for all IP prefix sizes
No performance drops as QoS, accounting features, committed access rate (CAR), and access control lists (ACLs) are enabled
Reliability and Availability
Online insertion and removal (OIR), enabling insertion and removal of line cards and SFP modules without impacting traffic
Network Management
Cisco IOS ® Software command-line interface (CLI)
Cisco 12000 Manager for configuration, fault, and performance element management
Simple Network Management Protocol (SNMP)
Protocols
Layer 3 routing protocols: Border Gateway Protocol Version 4 (BGPv4), Open Shortest Path First (OSPF), Intermediate System-to-Intermediate System (IS-IS), Enhanced Interior Gateway Routing Protocol (EIGRP), Routing Information Protocol (RIP), Distributed Forwarding Information Base (FIB) IP switching, Cisco Discovery Protocol, Internet Control Message Protocol (ICMP), Routing with Resource Reservation (RRR), and others
Multicast forwarding with support for source and shared distribution trees and the following protocols: Protocol Independent Multicast-dense mode (PIM-DM); PIM-sparse mode (PIM-SM); Internet Group Management Protocol Versions 1 and 1 (IGMPv1/v2); Cisco Group Management Protocol (GMP); Multiprotocol Border Gateway Protocol (MBGP); Multicast Source Discovery Protocol (MSDP); and others
Comprehensive MPLS support
Traffic engineering using RRR
IP and MPLS Traffic Engineering (MPLS TE)
IP and MPLS load balancing
MPLS, VPN mapping, and Ethernet over MPLS (EoMPLS)
Statistics and Accounting
Byte and packet counting per ingress port for IP and MPLS packets
Packet counting for Modified Deficit Round Robin (MDRR) and Weighted Random Early Detection (WRED)
Sampled NetFlow (v5 and v8)
Security
15,000 xACLs in the ingress side per port and per VLAN; 20,000 entries on ingress and egress at line rate supported on 4-port GE ISE line card
1024 ACLs on the egress side on per-port basis
QoS
8 queues per port, WRED and MDRR per port and queue
Rate limiting on the ingress and egress side
Traffic shaping on the egress side
Ethernet
802.1q VLAN support, 1024 VLANs, and jumbo frames
Source and destination MAC accounting and VLAN accounting
Cisco IPv6
Provider edge router without compromising performance (supported on 4-port GE ISE line cards)

Compliance and Agency Approvals

Expand

Compliance and Agency Approvals

Environmental
Operating temperature: 41 to 104°F (5 to 40°C)
Operating temperature (short-term): 23 to 131°F (-5 to 55°C)
Storage temperature: -4 to 149°F (-20 to 65°C)
Relative humidity:
5 to 85%, noncondensing, operating conditions
5 to 90%, noncondensing, operating conditions (short-term)
Up to 95%, noncondensing, nonoperating conditions
Operating altitude: -60 to 4000m
Safety
UL 1950
CSA 22.2-No. 950
EN60950
IEC 60950 CB Scheme
ACA TS001
AS/NZS 3260
EN60825/IEC60825 laser safety (supported on 1-port 10-GE line card)
FDA-Code of Federal Regulations (USA) laser (supported on 1-port 10-GE line card)
EMI
FCC CFR 47-Part 15 1998 Class A
ICES 003 Class A
AS/NRZ 3548 Class A
EN55022 Class B (up to 1 GHz)
VCCI Class A
CISPR 22 Class B (up to 1 GHz)
BSMI/CNS 13438: 1997 Class A
IEC-1000-3-2 Power line harmonics
IEC 61000-3-3 Voltage fluctuations and flicker
Immunity (Basic Standards)
IEC-1000-4-2 ESD (8-kV contact, 15-kV air)
IEC-1000-4-3 Radiated immunity (10 V/m)
IEC-1000-4-4 EFT (2-kV power port, 1-kV signal port)
IEC-1000-4-5 Surge AC port (4-kV CM, 2-kV DM)
IEC-1000-4-5 Surge Signal port (2-kV CM, 1-kV DM)
IEC-1000-4-5 Surge DC port (0.5-kV CM, 0.5-kV DM)
IEC-1000-4-6 Low Frequency Conductive Immunity, (10V)
IEC-1000-4-11 Voltage dips and sags
EN55024\CISPR24 ITE Immunity
ETSI and EN
EN 300 386
Network Equipment Building Standards (NEBS)
This product is designed to meet the following requirements:
SR-3580-NEBS criteria levels (Level 3-compliant)
GR-1089-Core-NEBS EMC and safety
GR-63-Core-NEBS Physical protection

Why Buy Refurbished?

Workmen and forklift

Product Details

We provide refurbished Cisco kit, finished to exceptional standards: rigorously tested, immaculately packed and backed by the best customer service you'll find anywhere.

Race large

Committed to Cisco

Go Communications specialises in Refurbished Cisco Systems equipment. We can source virtually any Cisco part. Through our SAMEasNEW refurbished programme, we can even provide high quality, pre-owned parts that Cisco no longer makes - reducing your need to upgrade end-of-life equipment.

Power supply packaging home 2

Committed to quality

Go Communications is committed to the highest levels of reliability and quality. Our state-of-the-art Cisco Certified Internetwork Expert (CCIE) development facility 'soak tests' every device and component we sell: only if it meets our exceptionally high standards can it be accepted onto our market-leading two-year warranty programme.

For hire 2

Committed to service

We believe in honouring our commitments, providing outstanding quality and delivering fantastic customer service at prices which are very hard to beat. As a result we have built a reputation as a trusted, reliable and knowledgeable source of high quality refurbished Cisco components.

Cleaning 03 home large

Experience

Everyone at Go Communications has been involved with Cisco Systems products for more than fifteen years. That's not just those in our sales and engineering teams, but also our purchasing, logistics and even finance departments.

About us

Fast Delivery

We believe we are one of the UK's fastest and most efficient Cisco delivery services. For instance, 'in stock' items can be delivered within the M25 corridor within two hours, or to Scotland and Wales within eight hours.

Cleaning 01 home large

Two Year Warranty

We offer an industry-leading two year warranty* on all of our refurbished products. This includes overnight advanced replacement and ongoing technical support from our CCIE and CCNA certified technicians. We aim to replace all equipment under warranty within 24 hours. If the item isn't in stock, please allow up to 72 hours. If a replacement isn't available in time, we may offer a temporary solution free of charge. * Retail end-user clients only.

Brass band large

Terms and conditions of sale and purchase

Please follow the links for more details on our Terms of Purchase and Terms of Sale. For more information about our products, please call 01279 408 777 or email us at: sales@gocomsys.com.

Why Go Communications?