/ Products / CISCO / 6DS3-SMB-B
6DS3-SMB-B

Refurbished CISCO 6DS3-SMB-B

CISCO Refurbished

Manufacturer
CISCO
Condition
Refurbished
Lead Time
2-3 Days
Availability
Not In Stock
List Price/RRP
US$35,000.00

Description

The 6DS3-SMB-B is a product offered by CISCO, designed for use in telecommunications networks. It is a circuit module that supports DS3 connectivity, which is used for transmitting digital signals at a rate of 44.736 Mbps. The module features six ports, allowing for the simultaneous transmission of data over multiple circuits.The 6DS3-SMB-B has built-in redundancy features, including hot-swappable spare cards and redundant power supplies. The system is managed through a web-based interface that allows for configuration and monitoring of network traffic. It is compatible with a variety of network protocols, including TCP/IP, UDP, and SNMP.The 6DS3-SMB-B is a reliable and high-performance solution for companies looking to expand their telecommunications capabilities. Its redundancy features ensure that network downtime is minimized, while its multi-port design enables efficient data transfer. The web-based interface makes it easy to manage and monitor network traffic, providing a comprehensive solution for telecommunications needs.

Make an enquiry

about 6DS3-SMB-B

We are Refurbished Network Equipment specialists and we may have 6DS3-SMB-B available to us if it’s not in stock. Please complete the form and we'll get back to you as soon as we can. We have a vast amount of experience and knowledge with all legacy CISCO components and will be happy to provide you with expert after-sales advice, should you need it.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Part Code
6DS3-SMB-B
Description
6DS3-SMB-B w/ ECC
Weight
3kg
Manufacturer
CISCO
End of Hardware Support
Yes (24 May 2012)
End of Sale
Yes (26 May 2007)
End of Life
Yes (26 May 2006)
Warranty
2 year warranty icon

Product Features

Expand

Product Features

Reliability and Availability
Online insertion and removal (OIR), enabling insertion and removal of line cards without affecting traffic flows through other line cards
Network Management
Cisco IOS ® Software command-line interface (CLI)
Simple Network Management Protocol (SNMP) MIBs:
DS-3/E3 MIB (RFC 1407)
Frame Relay MIB (RFC 1315)
MIB-II
Receive and transmit alarm processing
Interfaces
Local (internal) or loop (recovered from network) clocking mode
Both local (diagnostic) and network (line) loopback
Packet-Layer Features
Cisco Express Forwarding table that can accommodate up to 1 million forwarding entries
Application-specific integrated circuit (ASIC)-based queuing
QoS support:
Committed access rate (CAR)
Weighted Random Early Detection (WRED)
Modified Deficit Round Robin (MDRR)
Multiprotocol Label Switching (MPLS)
VPN
Traffic engineering
Class of service (CoS)
Layer 2 Encapsulations
High-Level Data Link Control (HDLC)
Point-to-Point Protocol (PPP; RFCs 1661 and 2153)
IETF RFC 1490 Frame Relay Encapsulation
DS-3 Specifications
Full- and half-duplex connectivity at DS-3 rate (44.736 MHz)
Scrambling and subrate support of major data-service-unit (DSU) vendors
C-bit or M13 framing (software selectable)
Support for16- and 32-bit cyclic redundancy checks (CRCs) (16-bit default)
Line build-out: configurable for up to 450 ft
24-hour history maintained for error statistics and failure counts
DS-3 alarm and event detection (once per second polling)
Alarm indication signal (AIS)
Out of frame (OOF)
Far-end receive failure (FERF)
Complete compatibility of T3 DSU/channel service unit (CSU) subrate and scrambling features with the following vendors: Cisco, ADC Kentrox, Digital Link, and LarseCom
E3 Specifications
ITU-T G.751 as applicable
Full-duplex connectivity at E3 rate (34 Mbps)
Scrambling and subrate support of major DSU vendors
Support for 16- and 32-bit cyclic redundancy checks (CRCs) (16-bit default)
24-hour history maintained for error statistics and failure counts
E3 alarm and event detection (once per second polling)
AIS
Loss of frame (LOF)
Remote alarm indication (RAI)
Complete compatibility of E3 DSU/CSU subrate and scrambling features with the following vendors: Cisco, ADC Kentrox, and Digital Link

Compliance and Agency Approvals

Expand

Compliance and Agency Approvals

Environmental
Operating temperature: 32 to 104°F (0 to 40°C)
Storage temperature: -4 to 149°F (-20 to 65°C)
Relative humidity:
10 to 90%, noncondensing, operating conditions
5 to 95%, noncondensing, nonoperating conditions
Safety
UL 1950
CSA 22.2-No. 950
EN60950
IEC 60950 CB Scheme
ACA TS001
AS/NZS 3260
EMI
FCC CFR 47-Part 15 1998 Class A
ICES 003 Class A
AS/NRZ 3548 Class A
EN55022 Class B (up to 1 GHz)
VCCI Class A
CISPR 22 Class B (up to 1 GHz)
BSMI/CNS 13438: 1997 Class A
IEC-1000-3-2 Power line harmonics
IEC 61000-3-3 Voltage fluctuations and flicker
Immunity (basic standards)
IEC-1000-4-2 ESD (8-kV contact, 15-kV air)
IEC-1000-4-3 Radiated immunity (10 V/m)
IEC-1000-4-4 EFT (2-kV power port, 1-kV signal port)
IEC-1000-4-5 Surge AC port (4-kV CM, 2-kV DM)
IEC-1000-4-5 Surge Signal port (2-kV CM, 1-kV DM)
IEC-1000-4-5 Surge DC port (0.5-kV CM, 0.5-kV DM)
IEC-1000-4-6 Low Frequency Conductive Immunity, (10V)
IEC-1000-4-11 Voltage dips and sags
EN55024\CISPR24 ITE Immunity
ETSI and EN
EN300 386
Network Equipment Building Standards (NEBS)
These products have been designed to meet the following requirements:
SR-3580-NEBS: criteria levels (Level 3 compliant)
GR-63-Core-NEBS: physical protection
GR-1089-Core-NEBS: EMC and safety
Frame Relay
RFC 1490-Multiprotocol Encapsulation
RFC 1315-Frame Relay Management Information Base
RFC 1293-Frame Relay Inverse Address Resolution Protocol
FRF 1.1-User-Network Interface (UNI)
FRF 2.1-Frame Relay Network-to-Network Interface (NNI)
FRF 3.1-Multiprotocol encapsulation
Other Standards
Gang of Four LMI
Q.922 Annex A
ANSI T1.617 Annex D
ANSI T1.618, T1.606
ITU-T Q.933, Q.922

Why Buy Refurbished?

Workmen and forklift

Product Details

We provide refurbished Cisco kit, finished to exceptional standards: rigorously tested, immaculately packed and backed by the best customer service you'll find anywhere.

Race large

Committed to Cisco

Go Communications specialises in Refurbished Cisco Systems equipment. We can source virtually any Cisco part. Through our SAMEasNEW refurbished programme, we can even provide high quality, pre-owned parts that Cisco no longer makes - reducing your need to upgrade end-of-life equipment.

Power supply packaging home 2

Committed to quality

Go Communications is committed to the highest levels of reliability and quality. Our state-of-the-art Cisco Certified Internetwork Expert (CCIE) development facility 'soak tests' every device and component we sell: only if it meets our exceptionally high standards can it be accepted onto our market-leading two-year warranty programme.

For hire 2

Committed to service

We believe in honouring our commitments, providing outstanding quality and delivering fantastic customer service at prices which are very hard to beat. As a result we have built a reputation as a trusted, reliable and knowledgeable source of high quality refurbished Cisco components.

Cleaning 03 home large

Experience

Everyone at Go Communications has been involved with Cisco Systems products for more than fifteen years. That's not just those in our sales and engineering teams, but also our purchasing, logistics and even finance departments.

About us

Fast Delivery

We believe we are one of the UK's fastest and most efficient Cisco delivery services. For instance, 'in stock' items can be delivered within the M25 corridor within two hours, or to Scotland and Wales within eight hours.

Cleaning 01 home large

Two Year Warranty

We offer an industry-leading two year warranty* on all of our refurbished products. This includes overnight advanced replacement and ongoing technical support from our CCIE and CCNA certified technicians. We aim to replace all equipment under warranty within 24 hours. If the item isn't in stock, please allow up to 72 hours. If a replacement isn't available in time, we may offer a temporary solution free of charge. * Retail end-user clients only.

Brass band large

Terms and conditions of sale and purchase

Please follow the links for more details on our Terms of Purchase and Terms of Sale. For more information about our products, please call 01279 408 777 or email us at: sales@gocomsys.com.

Why Go Communications?