
CISCO Refurbished
- Manufacturer
- CISCO
- Condition
- Refurbished
- Availability
- In Stock
- List Price/RRP
- US$2,300.00
- Price
- US$48.00 Enquire
Description
NM-1FE2W-V2 is a network module manufactured by CISCO that supports one Fast Ethernet port (10/100) and two WAN ports. It is designed to fit into a CISCO router and provides additional connectivity options for users. The module supports different WAN technologies, including leased lines, frame relay, and xDSL, making it versatile for various network setups. It also features Quality of Service (QoS) capabilities, allowing businesses to prioritize critical applications and improve network performance. The module is hot-swappable, meaning it can be installed or removed while the router is running, without affecting the network's operation. The compact design of the module makes it easy to handle and install. It provides a cost-effective solution for businesses that need to expand their network's connectivity options or replace their existing network module. Overall, NM-1FE2W-V2 is a reliable and efficient network module that meets the connectivity needs of small and medium-sized businesses.- Part Code
- NM-1FE2W-V2
- Description
- 1 10/100 Ethernet with 2 WAN Card Slot Network Module
- Weight
- 1kg
- Manufacturer
- CISCO
G.SHDSL WICs with Cisco Access Routers Features and Benefits
Expand
G.SHDSL WICs with Cisco Access Routers Features and Benefits
Integrated Voice and Data Networking
Voice and Data Integration
Reduces long-distance toll charges by allowing the data network to carry interoffice voice and fax traffic
Works with existing handsets, key units, and private branch exchanges (PBXs), eliminating the need for a costly phone-equipment upgrade
Supports critical IP QoS features in Cisco IOS Software
Provides traffic management with ATM CoS
Works with existing handsets, key units, and private branch exchanges (PBXs), eliminating the need for a costly phone-equipment upgrade
Supports critical IP QoS features in Cisco IOS Software
Provides traffic management with ATM CoS
Digital Voice Interfaces
Provides toll-quality, award-winning derived VoIP; software-support VoIP/AAL5 and voice over ATM (VoATM)/AAL2 (Cisco 2800, 3800, 2600, and 3700 only); and AAL5
Analog Voice Interfaces
Supports analog voice for VoATM/VoIP over AAL5
Standards-Based H.323 Signaling
Allows an ecosystem of third-party vendors to develop applications for a complete solution; allows rapid low-cost deployment of VoIP
Digital Signal Processors (DSPs) and Voice-Compression Codecs G.711, G.729a, G.723.1, and G.726
Provide hardware-based compressed voice to fit significantly more voice lines over a single copper pair without breaking the end-to-end delay budget
Modular Architecture
Variety of WICs, Voice Interface Cards (VICs), and Network Modules
Offers added flexibility and investment protection
Provides easy migration from Frame Relay or asymmetric DSL (ADSL) to SHDSL
Provides easy migration from Frame Relay or asymmetric DSL (ADSL) to SHDSL
Security with VPN and Integrated Firewall
Hardware-Based Encryption
Helps enable creation of VPNs by providing industry-standard data privacy, integrity, and authenticity as data traverses the Internet or a shared public network
Offers hardware-based VPN encryption through onboard processor or Advanced Integration Module (AIM) VPN card
Offers hardware-based VPN encryption through onboard processor or Advanced Integration Module (AIM) VPN card
Triple Digital Encryption Standard (3DES) IP Security (IPSec), Advanced Encryption Standard (AES), Generic Routing Encapsulation (GRE), Layer 2 Tunneling Protocol (L2TP), and Layer 2 Forwarding (L2F)
Offers choice of standards-based tunneling methods to create VPNs for IP and non-IP traffic
Offers full interoperability with public certificate authorities and IPSec standards-based products
Constitutes part of the scalable Cisco end-to-end VPN solution portfolio
Offers full interoperability with public certificate authorities and IPSec standards-based products
Constitutes part of the scalable Cisco end-to-end VPN solution portfolio
Cisco IOS Firewall
Cisco IOS Firewall includes context-based access control for dynamic firewall filtering, denial-of-service (DoS) detection and prevention, Java blocking, and real-time alerts
Allows internal users to access the Internet with secure, per-application-based, dynamic access control while preventing unauthorized Internet users from accessing the internal LAN
Allows internal users to access the Internet with secure, per-application-based, dynamic access control while preventing unauthorized Internet users from accessing the internal LAN
Network Address Translation and Port Address Translation (NAT/PAT)
Hides internal IP addresses from external networks
Prevents certain DoS attacks from outside networks
Allows multiple users access with a single IP address
Prevents certain DoS attacks from outside networks
Allows multiple users access with a single IP address
Password Authentication Protocol/Challenge Handshake Authentication Protocol (PAP/CHAP), Microsoft CHAP (MS-CHAP), RADIUS, and TACACS+
Supports all leading user identity verification schemes
Route and Router Authentication
Accepts routing table updates from only known routers, helping ensure that no corrupt information from unknown sources is received
ATM Features
ATM Traffic Unspecified Bit Rate (UBR), Non-Real-Time Variable Bit Rate (VBR-nrt), Real-Time Variable Bit Rate (VBR-rt), and Constant Bit Rate (CBR) with Traffic Shaping
Helps ensure QoS guarantees for real-time traffic, with ability to send traffic over the appropriate virtual circuit to provide ATM-level shaping and ensure that no head-of-line blocking occurs between circuits of different or equal traffic classes
Up to 23 Virtual Circuits per WIC
Helps enable more sessions at a time; is relevant for small and medium-sized businesses and small branch offices with 50 to 200 employees
Supports per-virtual circuit queuing in Cisco IOS Software releases 12.2(2)XK, 12.2(4)XL, 12.2(13)T, 12.2(8)YN, and subsequent releases (per-virtual circuit queuing not supported in Cisco IOS Software releases 12.2(4)T, 12.2(8)T1, or 12.2(11)T)
Supports per-virtual circuit queuing in Cisco IOS Software releases 12.2(2)XK, 12.2(4)XL, 12.2(13)T, 12.2(8)YN, and subsequent releases (per-virtual circuit queuing not supported in Cisco IOS Software releases 12.2(4)T, 12.2(8)T1, or 12.2(11)T)
Point-to-Point Protocol (PPP) over ATM
Helps ensure compatibility with existing network
F5 OAM Continuity Check (F5OAMCC) and Loopback
Supported in Cisco IOS Software releases 12.2(4)XL, 12.2(11)T2, 12.2(8)YN, and subsequent releases
Interim Local Management Interface (ILMI)
Supported in Cisco IOS Software releases 12.2(4)XL, 12.2(13)T, 12.2(8)YN, and subsequent releases
PPP over Ethernet Client
Meets service provider requirements and eliminates the need for additional network software on LAN-connected client PCs
RFC 2684 Routing
Supports RFC 2684 Routing
ATM Oversubscription for DSL
Allows bandwidth oversubscription to be configured for VBR and UBR+ service classes
Supported in Cisco IOS Software releases starting with 12.4(2)XA; also available in Release 12.4(3rd)T and above
Supported in Cisco IOS Software releases starting with 12.4(2)XA; also available in Release 12.4(3rd)T and above
Device Integration
Integrated Router, Voice Gateway, Firewall, and VPN in a Single Device
Reduces costs and simplifies management
Supported IP QoS Features
Expand
Supported IP QoS Features
Classification and Marking
Class-based marking with differentiated services code point (DSCP) (data only)
Committed access rate (CAR) with DSCP (Ingress-Ethernet/Fast Ethernet; Egress-G.SHDSL)
Dial-peer DSCP/IP Precedence marking
Committed access rate (CAR) with DSCP (Ingress-Ethernet/Fast Ethernet; Egress-G.SHDSL)
Dial-peer DSCP/IP Precedence marking
Queuing and Scheduling
Class-Based Weighted Fair Queuing (CBWFQ)
Low Latency Queuing (LLQ)
Driver per-virtual circuit queuing
Low Latency Queuing (LLQ)
Driver per-virtual circuit queuing
Congestion Avoidance
Class-Based Weighted Random Early Detection (WRED) with DSCP (egress)
Policing and Traffic Shaping
Class-based policing
Per-ATM virtual circuit shaping for VBR-nrt
ATM cell loss priority (CLP) bit marking*
Per-ATM virtual circuit shaping for VBR-nrt
ATM cell loss priority (CLP) bit marking*
Link Efficiency
Tunable Tx ring buffer for values 2 through 601
Multilink PPP (MLPPP) link fragmentation and interleaving (LFI)
MLPPP with LLQ, CBWFQ, and other QoS features*
Compressed Real-Time Transport Protocol (cRTP)*
Multilink PPP (MLPPP) link fragmentation and interleaving (LFI)
MLPPP with LLQ, CBWFQ, and other QoS features*
Compressed Real-Time Transport Protocol (cRTP)*
Other (IP QoS)
Local policy routing (LPR)
Policy-based routing (PBR)
IP QoS map to ATM CoS
Policy-based routing (PBR)
IP QoS map to ATM CoS
Maximum Number of G.SHDSL WICs per Platform
Expand
Maximum Number of G.SHDSL WICs per Platform
Platform
Maximum Number of G.SHDSL WICs
Cisco 1721, 1751, and 1760
2
Cisco 1841
2
Cisco 2600XM
4
Cisco 2801
3
Cisco 2811 through Cisco 2851
4
Cisco 2691
5
Cisco 3725
7
Cisco 3745
11
Cisco 3825
8
Cisco 3845
12
Hardware Specifications
Expand
Hardware Specifications
G.SHDSL Chipset
Conexant Chipset
Dimensions (H x W x D)
0.75 x 3.08 x 4.38 in. ( (1.91 x 6.93 x 9.86 cm)
Weight
2.4 oz (68g)
LEDs
CD (carrier detect)
LP (loopback)
OK (DSLSAR download complete)
LP (loopback)
OK (DSLSAR download complete)
Ports
Single RJ-11/RJ-14C connector
Cabling
RJ-11 line cord
Network Equipment Building Standards (NEBS) Compliance
Level 3 compliant (Type 2/4)
Refurbished CISCO NM-1FE2W-V2 datasheet
Download PDF







