CISCO Refurbished
- Manufacturer
- CISCO
- Condition
- Refurbished
- Availability
- In Stock
- List Price/RRP
- US$2,600.00
- Price
- US$19.00 Enquire
Description
The NM-1CE1T1-PRI by Cisco is a module that can be added to certain Cisco routers to support voice and data communications. It has ports for both T1 and E1 connections, which are commonly used in telecommunications infrastructure. It also provides support for PRI (Primary Rate Interface) connections, a standard for transmitting voice and data over digital lines. This module is ideal for businesses and organizations that need to manage multiple channels of voice traffic, such as call centers or large offices. It is designed to be easy to install and configure, and provides high-quality voice and data transmissions. Overall, the NM-1CE1T1-PRI is a reliable and versatile solution for organizations that need to integrate voice and data communications.
- Part Code
- NM-1CE1T1-PRI
- Description
- 1-Port Channelized E1/T1/ISDN-PRI Network Module
- Weight
- 1kg
- Manufacturer
- CISCO
- End of Hardware Support
- Yes
- End of Sale
- Yes
- End of Life
- Yes
- Warranty
-
Supported Platforms and Minimum Software Requirements
Expand
Supported Platforms and Minimum Software Requirements
Maximum Supported NM-xCE1T1-PRI Modules per Platform
Expand
Maximum Supported NM-xCE1T1-PRI Modules per Platform
Software and Management Features
Expand
Software and Management Features
Controller local loopback
Interface local loopback
T1 loopback modes
Interface local loopback
Interface remote loopback
Controller local loopback
Controller remote loopback
CSU loopback modes for T1 CSU
Data terminal equipment (DTE) loopback
Network loopback
Payload loopback
V.54
Blue Alarm-Receive alarm indication signal (AIS) from network
Red Alarm-Loss of network signal
CISCO-ICSUDSU-MIB
Cisco Intelligence Engine (IE2100)
CiscoWorks
ISDN Q.921 and Q.931 decode
All other previously existing applicable Cisco IOS debugs
Hardware Specifications for the Cisco E1/T1 ISDN PRI Network Module
Expand
Hardware Specifications for the Cisco E1/T1 ISDN PRI Network Module
3.9 x 18.0 x 18.3 centimeters
T1: T1 mode selected
E1-BAL: E1 balanced mode selected
E1-UNBAL: E1 unbalanced mode selected
CD: Carrier detect
LP: Loop condition present
RA: Remote alarm detected
LA: Local alarm detected
LEDs per module
C0: Tx/Rx Mon bantam jacks connected to port 0
C1: Tx/Rx Mon bantam jacks connected to port 1
EN: Network-module (NM) Enable
AIM: Integrated Advanced Integration Module (AIM) slot in use (future use-currently disabled)
Tx/Rx Mon bantam (tty) jacks for monitoring network activity (port selectable through Cisco IOS Command Line Interface (CLI))
T1: (1.544 Mbps)
T1: AMI, B8ZS
T1: SF and ESF
T1 (LBO): - 0, -7.5, or -15 dB
Product Numbers of the Cisco E1/T1 ISDN PRI Network Module
Expand
Product Numbers of the Cisco E1/T1 ISDN PRI Network Module
Regulatory Compliance and Safety (Partial Listing*)
Expand
Regulatory Compliance and Safety (Partial Listing*)
CS-03
Australia (S016, S038)
JATE (T1)
TBR4, 12, 13 (and NET5, ETS300156, ETS300 011)
ANSI T1.403
Canada (C22.2 No.60950)
Europe (EN60950)
Australia/New Zealand (AS/NZS3260, TS001)
Other Countries (IEC60950)
AS/NZS3548:1995
VCCI:V-3/2000.04
CNS13438:1997
CFR47 Part 15:2000
EN61000-6-1:2001
CISPR22:1997 [EN55022:1998]
EN55024:1998
EN50082-1:1992, EN50082-1:1997
EN61000-4-2:1995 [incl AMD1 + AMD2]
EN61000-4-3:1996 [Incl AMD 1 & 2]
EN61000-4-4:1995, EN61000-4-5:1995
EN61000-4-6:1996 [incl AMD1]
Why Buy Refurbished?
Product Details
We provide refurbished Cisco kit, finished to exceptional standards: rigorously tested, immaculately packed and backed by the best customer service you'll find anywhere.
Committed to Cisco
Go Communications specialises in Refurbished Cisco Systems equipment. We can source virtually any Cisco part. Through our SAMEasNEW refurbished programme, we can even provide high quality, pre-owned parts that Cisco no longer makes - reducing your need to upgrade end-of-life equipment.
Committed to quality
Go Communications is committed to the highest levels of reliability and quality. Our state-of-the-art Cisco Certified Internetwork Expert (CCIE) development facility 'soak tests' every device and component we sell: only if it meets our exceptionally high standards can it be accepted onto our market-leading two-year warranty programme.
Committed to service
We believe in honouring our commitments, providing outstanding quality and delivering fantastic customer service at prices which are very hard to beat. As a result we have built a reputation as a trusted, reliable and knowledgeable source of high quality refurbished Cisco components.
Experience
Everyone at Go Communications has been involved with Cisco Systems products for more than fifteen years. That's not just those in our sales and engineering teams, but also our purchasing, logistics and even finance departments.
Fast Delivery
We believe we are one of the UK's fastest and most efficient Cisco delivery services. For instance, 'in stock' items can be delivered within the M25 corridor within two hours, or to Scotland and Wales within eight hours.
Two Year Warranty
We offer an industry-leading two year warranty* on all of our refurbished products. This includes overnight advanced replacement and ongoing technical support from our CCIE and CCNA certified technicians. We aim to replace all equipment under warranty within 24 hours. If the item isn't in stock, please allow up to 72 hours. If a replacement isn't available in time, we may offer a temporary solution free of charge. * Retail end-user clients only.
Terms and conditions of sale and purchase
Please follow the links for more details on our Terms of Purchase and Terms of Sale. For more information about our products, please call 01279 408 777 or email us at: sales@gocomsys.com.