CISCO Refurbished
- Manufacturer
- CISCO
- Condition
- Refurbished
- Availability
- Not In Stock
- List Price/RRP
- US$17,000.00
Description
The SPA-4XT3/E3-V2 is a product manufactured by CISCO that enables users to connect their networks to T3/E3 lines. The product accommodates four ports, making it possible to connect multiple networks to the T3/E3 lines. The SPA-4XT3/E3-V2 also incorporates a variety of features including advanced line-loopback diagnostic tests, BERT (Bit Error Rate Test), remote alarm monitoring, and automatic protection switching.Moreover, this product can be used with a variety of Cisco devices, including the Cisco 7600 series, ASR 1000, and the 12000 series. The product provides flexibility in configurations such as single-port mode, three-port mode, or four-port mode, depending on specific needs.The SPA-4XT3/E3-V2 is easy to install and manage. It includes a comprehensive management interface that enables users to monitor network performance, configure port settings, and perform other essential management tasks. Overall, the SPA-4XT3/E3-V2 is an efficient networking product that provides reliable and versatile connectivity between T3/E3 lines and multiple networks.
- Part Code
- SPA-4XT3/E3-V2
- Description
- 4-port Clear Channel T3/E3 Shared Port Adapter, Version 2
- Manufacturer
- CISCO
- End of Hardware Support
- Yes (30 November 2027)
- End of Sale
- Yes (15 August 2022)
- End of Life
- Yes (5 May 2022)
- Warranty
-
Product Specifications
Expand
Product Specifications
Cisco ASR 1000 Series Routers
Cisco ASR 9000 Series Routers
Cisco ASR 1000 Series Routers with Cisco IOS XE Software Releases 3.12.0,3.11.2, and 3.10.3
Cisco ASR 9000 Series Routers with Cisco IOS XR Software Release 5.2.0
1.0 and 2.3 R-to-BNC adapter cable options
HDLC
PPP, RFC 1662
Frame Relay, RFC 1490
Full-duplex connectivity at T3 rate (44.736 MHz) or E3 rate (34.368 MHz)
Subrate and scrambling support of Quick Eagle Networks (formerly Digital Link), Larscom, ADC Kentrox, Adtran, and Verilink DSUs
Internal or network clock selectable per channel
Line and payload loopback capabilities:
Local and remote loopback at the T3 level
Response to embedded loopback commands
Insertion of loopback commands into transmitted signal
Bit-error-rate-testing (BERT) pattern generation and detection per channel
Selectable pseudorandom pattern up to 32 bits long, including all 0s, all 1s, 215, 220, 220 Quasi-Random Signal Sequence (QRSS), 223, and alternating 0s and 1s
32-bit error-count and bit-count registers
Fully independent transmit and receive sections
Detection of test patterns with bit error rates up to 10-2
24-hour history maintained for error statistics and failure counts, at 15-minute intervals
16- and 32-bit cyclic redundancy check (CRC); 16-bit default
Binary 3-zero substitution (B3ZS) line coding
T3 far-end alarm and control (FEAC) channel support
Compliance with T3 pulse mask per ANSI T1.102-1993
Maintenance data link (MDL)
Line build-out up to 450 feet (135 meters)
Alarm monitoring
Alarm indication signal (AIS)
Loss of signal (LOS)
Out of frame (OOF)
Far-end receive failure (FERF)
Performance data collection
Line coding violation (LCV)
Framing bit errors (F- or M-bit errors)
P-bit error counts
C-bit error counts
Far-end block error (FEBE) counts
High-density bipolar with three zeroes (HDB3) line coding
Compliance with E3 pulse mask
Software-configurable E3 national service bits
Alarm monitoring
AIS
LOS
OOF
FERF
Performance data collection
LCV
Framing-pattern errors
FEBE counts
Single SPA software reset
Height: 0.8 in. (2.03 cm) (single height)
Width: 6.75 in. (17.15 cm)
Depth: 7.28 in. (18.49 cm)
4-port: 8.4W maximum
Safety
UL 60950
CSA 22.2 No.60950
IEC 60950
EN 60950
AS/NZS 3260
TS001
EMC
CFR47 Part 15
ICES 003
EN55022
CISPR 22
AS/NZ 3548
VCCI
EN55024
EN50082-1
EN61000-6-1
Telecom (T3)
ANSI T1 107
T1 404
AT&T 54014
Telecom (E3)
G.703
G.751
G.832
Storage temperature: -38 to 150°F (-40 to 70°C)
Operating humidity: 5 to 85% relative humidity
Storage humidity: 5 to 95% relative humidity
Why Buy Refurbished?
Product Details
We provide refurbished Cisco kit, finished to exceptional standards: rigorously tested, immaculately packed and backed by the best customer service you'll find anywhere.
Committed to Cisco
Go Communications specialises in Refurbished Cisco Systems equipment. We can source virtually any Cisco part. Through our SAMEasNEW refurbished programme, we can even provide high quality, pre-owned parts that Cisco no longer makes - reducing your need to upgrade end-of-life equipment.
Committed to quality
Go Communications is committed to the highest levels of reliability and quality. Our state-of-the-art Cisco Certified Internetwork Expert (CCIE) development facility 'soak tests' every device and component we sell: only if it meets our exceptionally high standards can it be accepted onto our market-leading two-year warranty programme.
Committed to service
We believe in honouring our commitments, providing outstanding quality and delivering fantastic customer service at prices which are very hard to beat. As a result we have built a reputation as a trusted, reliable and knowledgeable source of high quality refurbished Cisco components.
Experience
Everyone at Go Communications has been involved with Cisco Systems products for more than fifteen years. That's not just those in our sales and engineering teams, but also our purchasing, logistics and even finance departments.
Fast Delivery
We believe we are one of the UK's fastest and most efficient Cisco delivery services. For instance, 'in stock' items can be delivered within the M25 corridor within two hours, or to Scotland and Wales within eight hours.
Two Year Warranty
We offer an industry-leading two year warranty* on all of our refurbished products. This includes overnight advanced replacement and ongoing technical support from our CCIE and CCNA certified technicians. We aim to replace all equipment under warranty within 24 hours. If the item isn't in stock, please allow up to 72 hours. If a replacement isn't available in time, we may offer a temporary solution free of charge. * Retail end-user clients only.
Terms and conditions of sale and purchase
Please follow the links for more details on our Terms of Purchase and Terms of Sale. For more information about our products, please call 01279 408 777 or email us at: sales@gocomsys.com.