/ Products / CISCO / SG220-26P-K9
SG220-26P-K9

SG220-26P-K9

CISCO Refurbished

Manufacturer
CISCO
Condition
Refurbished
Lead Time
2-3 days
Availability
Not In Stock

Description

The SG220-26P-K9 by CISCO is a network switch device that provides reliable connectivity for small businesses. This compact device has 26 ports, including 24 Gigabit Ethernet ports and two copper ports, and can support up to 384 Gbps throughput. Power over Ethernet (PoE) is also available, providing power to up to 12 PoE-enabled devices such as wireless access points or IP phones.This switch has a user-friendly web-based interface for easy setup and management. It also supports advanced features like Quality of Service (QoS) to prioritize certain types of traffic, VLANs to separate network traffic, and Link Aggregation Control Protocol (LACP) to increase network bandwidth.With its fanless design and low power consumption, the SG220-26P-K9 is an eco-friendly option for small businesses looking to connect multiple devices on their network. The switch also includes security features such as Secure Sockets Layer (SSL) encryption, Access Control Lists (ACLs), and port security to protect against unauthorized access.Overall, the SG220-26P-K9 by CISCO is a reliable and cost-effective network switch solution for small businesses looking to improve their network connectivity and security.

Make an enquiry

about SG220-26P-K9

We are Refurbished Network Equipment specialists and we may have SG220-26P-K9 available to us if it’s not in stock. Please complete the form and we'll get back to you as soon as we can. We have a vast amount of experience and knowledge with all legacy CISCO components and will be happy to provide you with expert after-sales advice, should you need it.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Part Code
SG220-26P-K9
Description
SG220-26P 26-Port Gigabit PoE Smart Switch
Manufacturer
CISCO
End of Hardware Support
Yes
End of Sale
Yes
End of Life
Yes
Warranty
2 year warranty icon

Product specifications

Expand

Product specifications

Layer 2 switching
MAC table
Up to 8,192 MAC addresses
Spanning Tree Protocol (STP)
Standard 802.1d Spanning Tree support, enabled by default
Fast convergence using 802.1w (Rapid Spanning Tree [RSTP])
Multiple Spanning Tree instances using 802.1s (MSTP)
16 instances are supported
Port grouping
Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP)
Up to 8 groups
Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation
Load balance based on source and destination MAC address, or source and destination MAC/IP
VLAN
Support for up to 256 VLANs simultaneously
Port-based and 802.1Q tag-based VLANs
Management VLAN
Guest VLAN
Auto voice VLAN
Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS
QinQ VLAN
VLANs transparently cross a service provider network while isolating traffic among customers
Generic VLAN Registration Protocol (GVRP) and Generic Attribute Registration Protocol (GARP)
Protocols for automatically propagating and configuring VLANs in a bridged domain
Head-Of-Line (HOL) blocking
HOL blocking prevention
Jumbo frame
Frame sizes up to 9,216 supported
Loopback detection
Loopback detection provides protection against loops by transmitting loop protocol packets out of ports on which loop protection has been enabled. It operates independently of STP.
Security
ACLs
Drop or rate limit based on source and destination MAC, VLAN ID or IP address, protocol, port, Differentiated Services Code Point (DSCP)/IP precedence, TCP/UDP source and destination ports, 802.1p priority, Ethernet type, Internet Control Message Protocol (ICMP) packets, IGMP packets, TCP flag
Support up to 512 rules
Port security
Creates the ability to lock source MAC addresses to ports; limits the number of learned MAC addresses
IEEE 802.1X (authenticator role)
802.1X: RADIUS authentication; guest VLAN;
Single-host, multiple-host, and multisession mode
RADIUS, TACACS+
Supports RADIUS and TACACS authentication; switch functions as a client
MAC address filtering
Supported
Storm control
Broadcast, multicast, and unknown unicast
DoS protection
DOS attack prevention
STP Bridge Protocol Data Unit (BPDU) Guard
This security mechanism protects the network from invalid configurations. A port enabled for BPDU Guard is shut down if a BPDU message is received on that port
Spanning Tree Loop Guard
This feature provides additional protection against Layer 2 forwarding loops (STP loops).
Secure Shell (SSH) Protocol
SSH is a secure replacement for Telnet traffic. SCP also uses SSH. SSH v1 and v2 are supported
QoS
Priority levels
8 hardware queues per port
Scheduling
Strict priority and Weighted Round-Robin (WRR) queue assignment based on DSCP and class of service (802.1p/CoS)
Class of service
Port-based; 802.1p VLAN priority-based; IPv4/v6 IP precedence, Type of Service (ToS), and DSCP-based; Differentiated Services (DiffServ); classification and re-marking ACLs, trusted QoS
Rate limiting
Ingress policer; egress shaping and rate control; per VLAN, per port, and flow-based
Multicast
Internet Group Management Protocol (IGMP) Versions 1, 2, and 3 Snooping
IGMP limits bandwidth-intensive multicast traffic to only the requesters; supports 256 multicast groups
IPv6
IPv6
IPv6 host mode
IPv6 over Ethernet
IPv6/IPv4 Dual Stack
IPv6 neighbor and router discovery (ND)
IPv6 stateless address auto-configuration
Path Maximum Transmission Unit (MTU) discovery
Duplicate Address Detection (DAD)
ICMP version 6
IPv6 ACL
Drop or rate limit IPv6 packets in hardware
IPv6 QoS
Prioritize IPv6 packets in hardware
Multicast Listener Discovery (MLD v1/2) Snooping
Deliver IPv6 multicast packets only to the required receivers
IPv6 applications
Web/SSL, Telnet server/SSH, DHCP Client, DHCP Autoconfig, CDP, LLDP
Discovery
Bonjour
The switch advertises itself using the Bonjour protocol
Link Layer Discovery Protocol (LLDP) (802.1ab) with LLDP-MED Extensions
LLDP allows the switch to advertise its identification, configuration, and capabilities to neighboring devices that store the data in a MIB. LLDP-MED is an enhancement to LLDP that adds the extensions needed for IP phones.
Power efficiency
EEE compliance (802.3az)
Support 802.3az Energy Efficient Ethernet on all ports; substantially reduce the power consumption when link bandwidth is not at full utilization
Energy Detect
Automatically turns power off on Gigabit Ethernet and 10/100 RJ-45 ports when detecting a link down
Active mode is resumed without loss of any packets when the switch detects the link up
Disable port LEDs
LEDs can be manually turned off to save on energy
Time-based PoE
PoE power can be on or off based on user-defined schedule to save energy

Hardware specifications

Expand

Hardware specifications

Package contents
Package contents
Cisco 220 Series Ethernet switch
Power cord
Mounting kit included in all SKUs
Console cable
Quick start guide

Country/region suffix for product ID

Expand

Country/region suffix for product ID

Suffix
Country/region
-NA
USA, Canada, Mexico, Colombia, Chile and rest of LATAM
-BR
Brazil
-AR
Argentina
-EU
EU, Russia, Ukraine, Israel, UAE, Turkey, Egypt, South Africa, Indonesia, Philippines, Vietnam, Thailand, India, Korea
-UK
United Kingdom, Saudi Arabia, Qatar, Kuwait, Singapore, Hong Kong, Malaysia
-AU
Australia, New Zealand
-CN
China

Why Buy Refurbished?

Workmen and forklift

Product Details

We provide refurbished Cisco kit, finished to exceptional standards: rigorously tested, immaculately packed and backed by the best customer service you'll find anywhere.

Race large

Committed to Cisco

Go Communications specialises in Refurbished Cisco Systems equipment. We can source virtually any Cisco part. Through our SAMEasNEW refurbished programme, we can even provide high quality, pre-owned parts that Cisco no longer makes - reducing your need to upgrade end-of-life equipment.

Power supply packaging home 2

Committed to quality

Go Communications is committed to the highest levels of reliability and quality. Our state-of-the-art Cisco Certified Internetwork Expert (CCIE) development facility 'soak tests' every device and component we sell: only if it meets our exceptionally high standards can it be accepted onto our market-leading two-year warranty programme.

For hire 2

Committed to service

We believe in honouring our commitments, providing outstanding quality and delivering fantastic customer service at prices which are very hard to beat. As a result we have built a reputation as a trusted, reliable and knowledgeable source of high quality refurbished Cisco components.

Cleaning 03 home large

Experience

Everyone at Go Communications has been involved with Cisco Systems products for more than fifteen years. That's not just those in our sales and engineering teams, but also our purchasing, logistics and even finance departments.

About us

Fast Delivery

We believe we are one of the UK's fastest and most efficient Cisco delivery services. For instance, 'in stock' items can be delivered within the M25 corridor within two hours, or to Scotland and Wales within eight hours.

Cleaning 01 home large

Two Year Warranty

We offer an industry-leading two year warranty* on all of our refurbished products. This includes overnight advanced replacement and ongoing technical support from our CCIE and CCNA certified technicians. We aim to replace all equipment under warranty within 24 hours. If the item isn't in stock, please allow up to 72 hours. If a replacement isn't available in time, we may offer a temporary solution free of charge. * Retail end-user clients only.

Brass band large

Terms and conditions of sale and purchase

Please follow the links for more details on our Terms of Purchase and Terms of Sale. For more information about our products, please call 01279 408 777 or email us at: sales@gocomsys.com.

Why Go Communications?