
CISCO Refurbished
- Manufacturer
- CISCO
- Condition
- Refurbished
- Lead Time
- 2-3 days
- Availability
- Not In Stock
- List Price/RRP
- US$46,000.00
Description
The WS-X6908-10G-2T is a networking module made by Cisco, a popular supplier of networking equipment. This module has an impressive 80 Gbps throughput and supports 8 ports with 10 Gigabit Ethernet speeds. The WS-X6908-10G-2T has a high-performance design and can handle large amounts of data traffic. It also allows for flexibility in network design and management, with features such as load balancing and link aggregation. The module is easy to install, and hot-swappable, ensuring minimal downtime during maintenance. It is compatible with a wide range of Cisco networking devices, making it easy to integrate into existing networks. The WS-X6908-10G-2T is well-suited for data centers and businesses that require high-speed and high-capacity network performance.
- Part Code
- WS-X6908-10G-2T
- Description
- C6K 8 port 10 Gigabit Ethernet module with DFC4 (Trustec) S
- Weight
- 3kg
- Manufacturer
- CISCO
- End of Hardware Support
- Yes (30 April 2021)
- End of Sale
- Yes (30 April 2016)
- End of Life
- Yes (1 October 2015)
Cisco Catalyst 6900 Series 8-Port 10 Gigabit Ethernet Fiber Module Primary Features
Expand
Cisco Catalyst 6900 Series 8-Port 10 Gigabit Ethernet Fiber Module Primary Features
WS-X6908-10G-2TXL: equipped with DFC4XL for distributed forwarding, supporting 1 million+ forwarding entries, increased ACL entries to 256K, increased Netflow entries to 1 million+ and increased IPv4 forwarding speed to 60 Mpps
Increased performance of up to 60Mpps for L2, IPv4 and MPLS forwarding and up to 30Mpps for IPv6 forwarding
Increased multicast routes to 256K
Support for 16K Bridge Domains, allowing the standard 4K VLANs to be reused across these bridge domains, effectively increasing the number of VLANs available in the system
Increased MAC Address Table to 128K
IPV4 IGMPv3 snooping in hardware
IPv6 MLDv2 snooping in hardware
PIM registers in hardware
IPV4 & IPv6 in IPv6 tunneling
IPv6 in IPv4 tunneling (ISATAP, 6to4, GRE)
QoS support for uniform, short pipe and pipe mode tunnel
Terminate the tunnel in the same loopback
Transmit: 1p7q4t
Differentiated Service Code Point (DSCP) based queue mapping
Weighted Random Early Detection (WRED)
Smoothed Round Robin (SRR) at egress
Approximately 20 Gbps per replication engine
4 replication engines per module delivering total throughput of 80 Gbps
88 ports (6513-E chassis)
176 ports (6513-E chassis)
Not supported in non-E Series chassis.
Can occupy slots 1-6 and 9-13 in a Cisco Catalyst 6513-E chassis
Product Specifications
Expand
Product Specifications
Dimensions (H x W x D): 1.73 x 14.4 x 16 in. (4.4 x 36.6 x 40.6 cm)
Weight: 12.6 pounds excluding X2 components; ¼ pound for each X2
Agency-certified for operation: 32 to 104°F (0 to 40°C)
Design and tested for operation 32 to 130°F (0 to 55°C)
Storage temperature: -40 to 167°F (-40 to 75°C)
Relative humidity: 10 to 90 percent, noncondensing
Operating altitude:
Agency-certified for operation: -500 to 6500 ft (-150 to 2000m)
Designed and tested for operation -500 to 10000 ft (-150 to 3000m)
EMC Standards:
FCC Part 15 (CFR 47) Class A
ICES-003 Class A
VCCI Class A
EN55022 Class A
EN55024
CISPR24
CISPR 22 Class A
AS/NZS CISPR 22 Class A
ETS 300 386
KN 22 Class A
EN61000-3-2
EN61000-3-3
CNS13438 Class A
Safety Standards:
UL 60950-1
CAN/CSA C22.2 No. 60950
EN 60950-1
IEC 60950-1
AS/NZS 60950-1
ETS 300 019-2-2, 2.3 Transportation
ETS 300 019-2-3, Class 3.2 Stationary Use
IP-MIB and IP-FORWARD-MIB for IPv6
IF-MIB (RFC 1573)
Bridge MIB (RFC 1493)
CISCO-STACK-MIB
CISCO-VTP-MIB
CISCO-CDP-MIB
RMON MIB (RFC 1757)
CISCO-PAGP-MIB
CISCO-STP-EXTENSIONS-MIB
CISCO-VLAN-BRIDGE-MIB
CISCO-VLAN-MEMBERSHIP-MIB
ENTITY-MIB (RFC 2037)
HC-RMON
RFC1213-MIB (MIB-II)
SMON-MIB
WS-X6908-10G-2TXL: 603 Watts Maximum
At the time of the writing of this datasheet, the final power numbers are not known. Please consult the 12.2(50)SY Release Notes for these numbers if they are not provided here.
Go tohttp://www.cisco.com/go/powercalculator for easy power consumption calculation.
Link: green (port enabled and connected), orange (port disabled), and off (port enabled and not connected)
Blue Beacon: Used to ID a specific module in a fully populated system, within a multi-system environment
Refurbished CISCO WS-X6908-10G-2T datasheet
Download PDF
Product datasheet
Download PDF - 489.647 KB
Why Buy Refurbished?

Product Details
We provide refurbished Cisco kit, finished to exceptional standards: rigorously tested, immaculately packed and backed by the best customer service you'll find anywhere.

Committed to Cisco
Go Communications specialises in Refurbished Cisco Systems equipment. We can source virtually any Cisco part. Through our SAMEasNEW refurbished programme, we can even provide high quality, pre-owned parts that Cisco no longer makes - reducing your need to upgrade end-of-life equipment.

Committed to quality
Go Communications is committed to the highest levels of reliability and quality. Our state-of-the-art Cisco Certified Internetwork Expert (CCIE) development facility 'soak tests' every device and component we sell: only if it meets our exceptionally high standards can it be accepted onto our market-leading two-year warranty programme.

Committed to service
We believe in honouring our commitments, providing outstanding quality and delivering fantastic customer service at prices which are very hard to beat. As a result we have built a reputation as a trusted, reliable and knowledgeable source of high quality refurbished Cisco components.

Experience
Everyone at Go Communications has been involved with Cisco Systems products for more than fifteen years. That's not just those in our sales and engineering teams, but also our purchasing, logistics and even finance departments.

Fast Delivery
We believe we are one of the UK's fastest and most efficient Cisco delivery services. For instance, 'in stock' items can be delivered within the M25 corridor within two hours, or to Scotland and Wales within eight hours.

Two Year Warranty
We offer an industry-leading two year warranty* on all of our refurbished products. This includes overnight advanced replacement and ongoing technical support from our CCIE and CCNA certified technicians. We aim to replace all equipment under warranty within 24 hours. If the item isn't in stock, please allow up to 72 hours. If a replacement isn't available in time, we may offer a temporary solution free of charge. * Retail end-user clients only.

Terms and conditions of sale and purchase
Please follow the links for more details on our Terms of Purchase and Terms of Sale. For more information about our products, please call 01279 408 777 or email us at: sales@gocomsys.com.